Accessories—continued, Ttl multi-flash sync cords sc-18 and sc-19, Ttl multi-flash adaptor as-10 – Nikon SPEEDLIGHT SB-16 User Manual

Page 87

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ACCESSORIES—continued

TTL Multi-Flash Sync Cords SC-18 and SC-19

The SC-18 and/or SC-19 are used to connect the flash

units together for TTL multiple flash operation. The SC-
18 is 1.5m long, while the SC-19 is 3m.

TTL Multi-Flash Adaptor AS-10

When you plan to perform TTL multiple flash operation
with more than three flash units or to use the SB-15 or
SB-18 as a slave flash unit, the AS-10 is required. With
one AS-10 having three TTL multiple flash terminals, you
can use up to three slave flash units including one
mounted on it.

A tripod socket at the bottom enables the SB-16B

mounted on the AS-10 to be fixed to a tripod. To per­

form TTL flash photography with two units using the SB-

16B as a slave flash unit or to perform TTL photography

with three units using the SB-16B as a master flash unit

mounted on the SC-17, use of the AS-10 is not always
needed. Without the AS-10, however, the electrical con­

tacts on the flash unit are uncovered
and can be the cause of incorrect

output control.

64

Advertising
This manual is related to the following products: