Manual multiple flash photography, Ttl multiple flash photography ~61, Photographic techniques —continued – Nikon SPEEDLIGHT SB-16 User Manual

Page 84

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

-PHOTOGRAPHIC TECHNIQUES —continued

Manual multiple flash photography

If the secondary flash unit is either a Nikon Speedlight

SB-11, SB-12, SB-14, SB-15, SB-16 or SB-17, use either

the SC-11 (approx. 25cm) or SC-15 (approx. 1m) sync

cord to connect the fiash units together via sync/muitipie

fiash terminai. With the SB-7E or SB-10, use the SC-5
(approx. 15cm), SC-7 (approx. 25cm) or SC-6 (approx.

1m). Aii these sync cords are avaiiabie as optionai ac­

cessories.

Note:

In manual multiple flash operation, rhake sure to use both flash

units

on

manual.

In

the

TTL

or

noh-TTL automatic

shooting mode, the

correct

exposure

cannot

be

obtained,

because

light

from

each

speedlight

affects the measurement.

Caution:

The SB-16 employs a special low-voltage triggering circuit to

prevent eiectrical shock and damage to the hot-shoe contact. W e do not

recommend mixing Nikon Speedlights with flash units of other makers for

multiple flash photography, unless you use slave units for remote trigger­

ing. Otherwise, incorrect operation and/or damage to the unit may result.

62

Advertising
This manual is related to the following products: