Canon 814XL User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
subject position beforehand. Then set the ex
posure.
Rim Transport and Rim End Warning
When the film is being transported, the film
transport indicator in the viewfinder will be blink.
Two feet before film ends the warning lamp will
light. When the film has reached the end, the film
transport indicator will go out. Check the footage
counter and if it indicates 50, remove the film
cartridge.
Removal of Rim Cartridge
Open the rear cover by pushing the opening but
ton, pull out the cartridge removal lever located
at the bottom of the film compartment and with
draw the film cartridge. You can tell that the film
has been exposed by the cut on the perforations
and by the word 'EXPOSED'.
Send your film to be developed as soon as
possible.