Canon 814XL User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
beforehand, and set the camera position so that
you don't make mistakes in framing.
* Please mount the finder cover when shooting.
Single Frame Shooting
Since
this
camera
has
a
magnetic
release
mechanism, single frame shooting is possible
with EE. In this case, please use the remote
switch 60.
1.
Set the main switch to 'OFF' and set the
filming speed dial at Q].
2.
Plug in the Remote Switch 60 into the remote
control socket.
3.
Set the main switch at 'RL' and press the
shutter release lever all the way in.
4.
When you press the button of the remote
switch, you can shoot single frames.
5.
To reset it, please reset the main switch the
same as when the remote control switch is being
used.
*
For single frame shooting, please use the
frame counter.
*
If you shoot single frames without using the
remote switch, set the filming speed dial to |j]
and pull the shutter release lever. Filming should
be done with manual aperture control and not
with EE.