Canon 814XL User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Shooting
Press down the remote switch button to begin
advancing film. Slide the button forward to set
the remote switch for running lock, which will
provide
continuous
shooting
even
after
your
finger has been withdrawn. If you want to check
exposure, pull the shutter lever, the same as run
ning lock. Then the exposure indication in the
viewfinder lights up for you to read the exposure.
In manual aperture control shooting as well, the
exposure value can be checked the same as
above.
How to Release
First, rotate the main switch to either 'R' or
'OFF', and unplug the Remote Switch. If you un
plug
the
remote
switch
first,
the
shutter
is
released and film will be wasted. Please follow
this sequence.
*
When remote control shooting is over, rotate
the main switch to 'OFF'. If you leave the switch
at 'RL', power consumption continues and short
ens battery life. Therefore it is better to make the
settings just before shooting.
*
When you shoot from a distance, since you
cannot verify the situation through the viewfind
er,
please
check
the
subject
condition
well