Mounting and detaching a lens, Mounting a lens, Detaching the lens – Canon EOS 50E User Manual
Page 19: Mounting and detaching a lons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Mounting and Detaching a Lens
Mounting a Lens
Remove the rear lens cap and the
camera body cap by turning the
cap as shown by the arrow.
Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until It snaps in place.
Set the focus mode switch on the
lens to AF.
1
2
3
If the focus mode switch is set to
M, autofocus will be disabled.
While the lens autofoouses, do
not touch the rotating part of the
lens.
^ Remove the lens cap.
Detaching the Lens
While pressing the lens release button,
turn the lens as shown by the arrow
until it stops, then remove the lens.
41
Be careful not to get the lens surface
and
electronic
contacts
scratched.
After detaching the lens, attach the
rear lens cap or put down the tens
with the rear end up.
19