Ii. basic operation, Full auto mode (□) – Canon EOS 50E User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II. Basic Operation
Quick and easy picture-taking with the Command Dial’s Full Auto and
Programmed Image Control modes Is described here. With these fully-
automatic picture-taking modes, all you do is press the shutter button and
the camera does the rest to suit the picture-taking situation.
The Full Auto mode and Programmed Image Control modes override all
metering mode lever, AF mode dial, film advance mode lever, and
Custom Function settings. The settings set automatically by each
Programmed Image Control mode are shown in “Automatic Settings” on
page 89.
Keep in mind that the settings you see on the AF mode dial and other
controls may not always apply.
1. Full Auto Mode (□)
The Full Auto mode is for any type of subject. One of the three focusing
points is used to focus the subject for easy picture-taking.
•1 While pressing the lock release
' button, turn the Command Dial to
Look through the viewfinder and
aim one of the three focusing
points on the subject,
• If
none of the focusing points cover the
subject, see "3. Focus Lock” on page 36.
AF Frame
24