Check the aperture setting and take the picture, Shutter speed display – Canon EOS 50E User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV. Creative Zone Modes
Press the shutter button halfway to
focus the subject.
• The shutter speed and aperture setting will
be displayed in the viewfinder and on the
LCD panel
Check the aperture setting and
take the picture.
• As long as the aperture setting is not
blinking,
a
correct
exposure
wiii
be
obtained.
If the maximum aperture setting (the smallest f-number) blinks, the scene is too
dark. In such a case, turn the Main Dial to set a slower shutter speed until the
aperture setting stops blinking.
If the minimum aperture setting (the largest f-number) blinks, the scene is too
bright. In such a case, turn the Main Dial to set a faster shutter speed until the
aperture setting stops blinking
Shutter speed display
The shutter speed can be set in half EV (exposure value) steps The shutter
speeds that the camera can display are shown below. The numbers begin with
the denominator of a fraction of second, while 0”7 means 0.7 sec. and 1” means 1
sec
4000 3000 2000 1500 1000 750 500 350 250 180 125 90 60 45 30 20
15 10 8 6 4 3 2 0"7 1” 1”5 2” 3” 4” 6” 8" 10” 15” 20” 30”
53