Calibration for vertical framing, Self-teaching eye-controlled autofocus – Canon EOS 50E User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
. AF Modes and Metering Modes
Calibration for Vertical
Framing
C Press the shutter button halfway, hold
the camera vertically, and press the
shutter button completely. Then
calibrate by following steps 1 to 5
above.
You should use the same calibration
No. that was used for horizontal-
frame calibration.
• When the camera is held vertically, the top
focusing
point
will
start
blinking
first
regardless of whether the camera grip is
facing up or down,
^ To take pictures, set the Command
* Dial to a mode except CAL and CF.
If the beeper sounds intermittently and the LCD panel display blinks, press the
shutter button again and start again from step 1.
When the calibration is completed, Eye-Controlied focusing point selection will
be set automatically.
Self-Teaching Eye-Controlled Autofocus
•
The camera accumulates eye movement data which is added to the calibration setting.
Different eye movements for different situations (outdoors, indoors, night, daytime,
verticai and horizontal framing) are noted to improve Eye-Controlled Autofocus precision.
•
Avoid having two people use the same calibration No. Doing so will reduce Eye-
Controlled Autofocus precision. The second person should either use another calibration
No. or delete the calibration setting before calibrating it for him or herself.
42