Using eye-controlled autofocus, Using eye-contnoiled autofocus – Canon EOS 50E User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ 8. Using Eye-Controlled Autofocus
With Eye-Controlled Autofocus, you just look at the focusing point to
select it.
• If the calibration No. is already set, skip steps 1 and 2 below.
^ Set the Command Dial to l^i.
Turn the Main Dial until your
calibration No. is displayed on the
LCD panel.
• The calibration No. blinks if it has no
calibration setting.
Set the Command Dial to
desired picture-taking mode.
the
•
Eye-Controlled Autofocus can be used
with all modes except Full Auto.
Press the focusing point selector.
• The current focusing point will light in red
in the viewfinder and the corresponding
focusing point symbol on the LCD panel
will blink.