AVer P5000 series User Manual
Page 105
Advertising
96
-
IVA: click the camera number (01 to 36) to set the alarm condition when IVA functions
are triggered. Click the Setting button to setup the system to send out the alarm when
IVA functions have triggered and status last the time that user has entered in
Continuous trigger duration. The time range is 0~ 300 seconds.
8. In Sensor section, select and click on the sensor number to set the condition for the
system to alarm. If the sensor normal status is high, set the sensor condition to low.
-
IP Camera Sensor: To adjust sensor high/low that is connected on the IP camera.
-
Continue trigger duration: Set a time period that when sensor has been trigger and
stay in the same status for that period, then the alarm will be sent out.
Advertising