AVer P5000 series - Manual (Page 123)

114
3. Click Edit button to switch to Emap setup mode.
4. Then, click the Map number (1 to 8) that user want to setup.
5. Next, click icon to setup name of Emap and load a map figure. When the Emap
Setting dialog box appears, click the open file icon ( ) to locate and select the map Enter
a name for this Emap in Name column. Click OK to save the setting.
6. When the inserted map appears on the Emap screen, user may now drag the camera,
sensor, and relay icons to its place on the map. Icons on the map can be relocated
anywhere. If user is going to locate the icon on the map to other area, right-click on the
icon on the Emap and click remove to put the icon back to the Resource list.
The available icons are look like (Camera), (Sensor), (Relay) and
un-available icons are look like (Camera), (Sensor), (Relay).