AVer P5000 series - Manual (Page 16)

7
1.4.1 Install Internal Hard Disk
The NVD/DVR unit can support up to 2 internal SATA hard disks. Follow the instructions below
to install the hard disk:
1. Un-screw the cover case (both side) and
open the cover case of NVR/DVR unit.
Push the button (as red circle mark) and
follow the arrow direction to push and
open the cover case.
2. Remove the tape on SATA cable.
3. Release the tenon and push the hard disk box forward at the same time to take out the
hard disk box.
4. Place the hard disk inside the hard disk box and align the hard disk
’s screw hole with
screw hole of hard disk box. And, secure the hard disk (both side).