AVer P5000 series - Manual (Page 88)

79
 Sensor
Setup the sensor of IP camera.
1. In Camera Management dialog box, click Sensor tab.
2. Click the drop-down list and select the sensor ID number.
3. Enter sensor name in Name column
4. In the Content section, display the NVR/DVR system automatically detects the camera and
input relates information. Enter a short comment for this sensor in Description column.
5. In the test section, click Test to check the sensor status. Red is high and Green is low.
6. Click Apply to exit and accept the setting and Cancel to exit without saving the setting.
The Sensor setting only support for IP camera.