AVer P5000 series User Manual
Page 114
105
h. Next, go to alarm action setting to setup FTP transmission via FTP (see
also
Upload Video Clip
Select Camera: Select the camera that the images will be captured and send
when the any alarm is triggered.
Before alarm (sec.)/After Alarm: To send the recorded image before and after
alarm occurs, enter the time that before alarm occurs in Before alarm (sec.)
and After alarm.
FTP Setting
IP:
Enter FTP server’s IP address.
Port: Enter the port number of FTP connection.
ID& Password: Enter the ID and Password that use to login FTP server.
-
PTZ preset point
Position the PTZ camera based on the preset point setting. Beside the PTZ preset
point check box, click Detail. In the Trigger PTZ Preset Setting dialog box, select the
PTZ camera number then select the Enable check box. Select the position of the PTZ
camera when the alarm is activated and ended. For the PTZ camera end point, user
can also select on preset position or Auto Pan between preset position groups.
7. After setup all alarm actions, click Apply to save the settings.