AVer P5000 series - Manual (Page 110)

101
- Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend
additional time in second before it stops the relay operation.
a. Beside the Relay Output check box, click Detail.
b. In the Relay Output dialog, select from the available relay list and in the Status
column, set to on/off the relay operation when the alarm is activated.
c. In the Retrieve time check box, you may enable/disable to extend the relay
operation time and set the duration in second (0 ~ 300 seconds).
d. Click OK to exit and accept the setting and Cancel to exit without saving the
setting.
- IP Camera Relay
Set to enable/disable the relay operation when the alarm is activated.
- Play Warning Sound
Play alarm sound.