AVer P5000 series - Manual (Page 84)

75
Cross Detection
Cross detection function detects moving objects that cross the virtual lines that user has set up
in IP camera application and to trigger the alarm.
1. Enable Cross line 1/2 check box
2. You will see the red/green line is shown on the video screen.
3. Drag the red line or green line to set the area for cross detection. You can set both lines
for cross detection or one of the lines. There is no priority for these 2 lines; the color is just
for you to differentiate when both lines are set.
4. After setting the cross detection area, click the arrow of line to set cross detect direction.
The arrow point is the direction of cross way.
5. In Display on OSD, if user wants to see the cross
detection line(s) always display on the screen, select
always. If user only wants to see the cross detection
line(s) when the cross detection has triggered, select
the time period (1s, 2s, 3s, 4s, or 5s) for cross line
displaying on screen.
6. Click Apply to save the settings.