AVer EB3004 NET & NET+ - Manual (Page 20)

14
2.1.3 Controlling PTZ Camera
Using remote control, user can easily control PTZ camera at local site. Before starting, make sure the
PTZ camera is connected with the DVR unit and PTZ function is enabled(see also
PTZ Setup of
Chapter 3.1 ).
2.1.3.1 To Enter the PTZ Mode
To control PTZ camera, user need to enter the PTZ mode first. Press button, and camera
channel number button ( ) . The surveillance monitor will switch to single screen PTZ
mode.
To exit PTZ mode, press button. Also, when the DVR system is idle over 1 minute, the DVR
system will automatically exit PTZ mode.
2.1.3.2 To Set Preset Position
User can set 9 preset positions for PTZ camera. Using to button to set the preset position.
1. Press and camera channel number button ( ) to enter PTZ mode.
2. Using , , and to adjust the lens of the PTZ camera to the position that user
wants.
3. Press any number button over 3 seconds and the position will be saved.
4. To move the PTZ camera to preset position, just press the number button.
Speed for PTZ
Camera
movement.
Using and
button to
adjust the speed.