AVer EB3004 NET & NET+ - Manual (Page 46)

40
OSD MENU Description
SYSTEM SETUP
PASSWORD CHANGE
DATE / TIME
SYSTEM INFO
AUDIO SETUP
DVR ID
LANGUAGE
CONFIGURATION
LOG
INSTANT PLAYBACK
1
ENGLISH
060 SEC
MULTIPLE DVR
AUDIO SETUP
AUDIO SETUP
AUDIO OUT @ QUAD
MUTE
CH1
15
VOLUME ADJUSTMENT
RESET TO DEFAULT
CH1 CH2 CH3 CH4
MUTE
Enable/disable to hear audio sound while preview or playback. To hear
sound, make sure the unit is connected to a speaker.
i
If you want to hear the voice when you playback the recorded file on
this DVR, please make sure that you have selected Audio Mute Off.
AUDIO OUT@ QUAD
Select the channel to output the audio signal While QUAD mode. Please
make sure the audio output device (such as a speaker) is connected to
DVR unit.
i
Audio output device has its own power supply is necessary.
VOLUME ADJUSTMENT
To adjust audio output volume.
RESET TO DEFAULT
Set all configurations back to factory default.
SYSTEM SETUP
PASSWORD CHANGE
DATE / TIME
SYSTEM INFO
AUDIO SETUP
DVR ID
LANGUAGE
CONFIGURATION
LOG
INSTANT PLAYBACK
1
ENGLISH
060 SEC
MULTIPLE DVR
MUTLIPLE DVR
Enable/disable multiple DVR system remote control. When user has more
than one DVR system, user can use MULTIPLE DVR function to control all
DVR system by single remote control.
i - Using remote control to enter the DVR ID and switch to the
selected DVR. To enter the DVR ID, please press +
number button( ~ ) can switch to the selected DVR.
- When idle time is over 1 minutes, user need to re-enter the DVR
ID in order to controll the selected DVR.
DVR ID
Assign an ID of the DVR system for multiple DVR controlling. When multiple
controlling, use remote control to press the DVR ID ( + number
button( ~ ) can switch to operate the DVR system.
INSTANT PLAYBACK
To set the time in seconds for automatically playback the video that has just
recorded.
LANGUAGE
Select the language of the system