AVer EB3004 NET & NET+ - Manual (Page 8)

2
1.2.2 EB3004 NET
+
Name Function
(1) DVR Power LED
Light when the unit is power on
(2) HDD LED
Indicate the hard disk running state. Light when the HDD is running (Read/Write)
(3) IR Sensor Receive signal from the remote control to operate the unit
(4) IR Sensor Port To connect extended IR sensor cable
(5) USB Mouse Port For USB mouse connection.
(6) USB 2.0 Port Connect to pen drive / external hard disk for backup
i
If the external hard disk is first time using, please format to FAT32 format.
(6) 1/2/3/4/QUAD Use these buttons in playback mode to switch to display each channel in full screen or
view all channels at the same time
Channel 1 Channel 2 Channel 3 Channel 4 QUAD
(7) Record Start video recording. To stop recording, press
(8) Menu Call up and exit the OSD main and sub menu
(9) UP/DOWN/SELECT
Use the UP and DOWN buttons to change setting and move to the left and right, and
SELECT to enter or make a selection
(10) Playback/OSD Menu
Control Buttons
Use the buttons in playback mode to:
Display the play list and play the recorded video
Wind back the video playback at the speed of 2x, 4x, 8x or 16x
Fast play the video playback at the speed of 2x, 4x, 8x or 16x
Temporarily freeze the video playback
Stop video playback