AVer SD1306 user manual - Manual (Page 26)

22
Name Function
(2) Speed
To adjust the movement range from number 1~9. The larger
number you choose, the bigger movement range you get.
(3) Focus Mode
When you use direction controller to move the camera position, you
can select focus mode in manual or auto.
(4) Patrol
Build a group to do patrol function. See below for detail setting.
(5) Preset point
Set the view angle. See below for detail setting.
(6) Auto Recovery
For setting the position of the IP camera after recovery. (In case
there is no setting for “Pan” and “Patrol”.
(7) Auto pan
Auto-pan function allows the camera to patrol between two preset
points. See below for detail setting.
(8) Cruise
Allows user to record PTZ movement (ex: zooming, focus, speed,
direction
…etc.) which can be playback right after. See below for
detail setting.
(9) Login IP
Show PC ’s IP address
(10) Bandwidth
Show current IP camera
’s transmitting bandwidth
(11) FW version
Show IP camera
’s current firmware version
(12) Logout Exit the application
(13) Advanced setting
To set Home Position, Focus distance, PTZ control and Relay out
functions. See below for detail setting.
(14) Zoom control
Increase optical zoom level. (Max.22X)
Decrease optical zoom level.
(15) Focus button
Manually adjust the focus
(16) Capture
Capture and save the image on the screen in *.bmp format
(17) Record
Start/stop audio and video recording. The recorded video will
be saved in *.avi format.
(18) 2-way audio
Click the Microphone button to talk to IP camera side from
user site. Click this button again to mute this function.