AVer SD1306 user manual - Manual (Page 29)

25
Cruise setting
 Number: Setting a cruise number: Create up to 8 types of
different movements (speed, Zoom, focus, direction)
assigned with 8 numbers. For example, when you click on
Record Start under cruise number 1, the movement pattern
you create will be assigned to number 1. Same method
applies to other numbers.
 Group: Build a group to do cruise function.
 Setting a Cruise group
1. To build a new group, select a number from "Group" drop-down list, and click "Edit". You
can customize up to 3 groups.
2. Give the group name, and select how long the cruise
run period. If you select "Always", the camera will
keep cruise until someone stop it manually.
[Note] Group name has to be less than 31 digits.
3. For each number in the list, select the cruise number
and click "Save". If you succeed, the group name you
set will be added to the patrol list.
4. To start cruise group, select one group from the list, and press . The camera will move
base on the cruise route.
Advanced setting

Home Position: For setting the home position of the IP Camera.

Focus Distance: The longer the distance is between the camera and the shot object, the longer
distance you should need. IPCAM cannot focus on the object nearer than focus distance. If you
select "3M" for focus distance, the image of those objects at 1M may not be clear.

PTZ Control: Under "Continuous" mode, when controlling the 4-direction arrows, users can press
and hold the button to let the camera lens move continuously. Under "Step by step" mode, when
controlling the 4-direction arrows, users can make a click on button to let the camera lens move one
step.

Relay Out 1: Tick the Relay out "ON" box to trigger the relay output for testing. Tick "Off" to stop
triggering.