AVer SD1306 user manual - Manual (Page 32)

28
System > General > Date & Time
In the “Date & Time” tab, the administrator can set and update the system’s date and time. After
filling in the correct settings, click Apply to apply the new settings.
(1)
(2)
(3)
(4)
Name Function
(1) Current Date & Time Display the current date and time.
(2) Date Format Select the date display format.
(3) Time Zone Set the local time zone. Check the box next to “Enable Daylight
Saving” to enable and setup the start date and end date for
daylight saving time.