AVer SD1306 user manual - Manual (Page 48)

44
System > Advance > SNMP
SNMP (Simple Network Management Protocol) provides a simple framework for administering
networked hardware. To manage the IP camera, you have to prepare a MIB browser or similar tools
first. SNMPv1, SNMPv2c, and SNMPv3 can be enabled simultaneously.
 SNMPv1 and SNMPv2: The term "Community name" in SNMPv1 and SNMPv2c can be roughly
regarded as key. The person who has the community name has the authority to read or edit the
information of IP camera via SNMP. Check the box to enable SNMPv1 or SNMPv2c protocol, and
specify the community name for write (read and write) and read (read-only). The user who uses
read community name to access the IP camera cannot modify any data of this camera.