AVer SD1306 user manual User Manual
Page 40
Advertising
36
RTSP Authentication: Select the RTSP authentication mode
– disable, basic, or digest.
RTSP Port: setup port for RTSP transmitting (default: 554)
RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecting. TCP
connection uses RTSP Port (554). UDP connection uses RTP Start and End Port.
ONVIF: User can enable ONVIF standard and select the ONVIF version or disable it.
Security: Yes is required account and password to connect with this IP camera through ONVIF
protocol. No is not required account and password to connect.
RTSP Keepalive: To keep connected until remote site disconnects it.
Advertising