Status information, Tatus, Nformation – AVer SD1306 user manual User Manual
Page 68
Advertising
64
Output Setting:
Mode setting: The output mode affects the DO or relay out duration.
On/off Switch: Relay status is based on sensor triggered times.
Time Switch: To restore the original relay status after the interval time.
Relay out: You can manually stop it at this page or at the preview page.
Status Information
Click Apply button to save the configuration.
Networking Info: Displays network information of the IP camera.
Product Info
Server Name: Assign a name to the IP camera and the name shows on the IP Installer. Also,
display the related information of the IP camera. Mark Status Bar to display the Server Name
of IP camera on preview interface.
Advertising