CDI Torque TORQUE WRENCHES Micro-Adjustable Click Type - Manual (Page 14)

Page 10
2. The orientation, size and style of the pawl in the wrench must be determined,
measured and noted so it can be found on the pawl selection chart. Use a micrometer
to measure the pawl and determine its
4 size and style.
3 A major recalibration requires the selection of a new pawl. To find the correct pawl,
locate the pawl removed from the wrench on the pawl selection chart. This is the
starting point for selecting a new pawl
Pawl Orientation Chart
O = Square Pawl
All sides are the same no orientation to pawl slot required.
ARM
T = Tall
Taller side of
the pawl is
CAM perpendicular
to the cam slot
ARM
S = Short
Shorter side of
The pawl is
CAM perpendicular
to the cam slot
4 Due to the machining tolerances, pawl sizes sometimes do not corresponding exactly to the number in the
pawl selection chart. If this occurs choose the pawl on the chart closest to the pawl removed from the
wrench.