CDI Torque TORQUE WRENCHES Micro-Adjustable Click Type - Manual (Page 24)

Page 20
NOTE
There are two distinct metal handle styles for the CDI torque wrenches.
They are:
•
A handle without a plastic bushing in the front. This model requires that the grooves
in the tube (between the splines and roll marking) have a spring rings in it. These are
wrenches that are from a maximum scale of 50 in. lb. to 250 in. lb
Spring Rings in tube
• A handle with a plastic bushing in the front. This handle requires the removal of the
spring ring from the groove in the tube (between the splines and roll marking).
6. Remove the lock ring from the handle.