CDI Torque TORQUE WRENCHES Micro-Adjustable Click Type - Manual (Page 18)

Page 14
EXAMPLE #2
The wrench reads approximately 5% high from nominal. Disassemble the wrench and
measure the pawl. It was .250 (6.35)
⇓
X .244 (6.20)
⇔
, orientated with the longer side of
the pawl perpendicular to the cam slot. To find the correct pawl, locate the pawl removed
from the wrench on the pawl selection chart. This pawl number is 1TA on the chart. This
is the starting point for selecting a new pawl.
To decrease the reading of the wrench 4% choose the pawl two places to the left of 1TB
(.250 (6.35)
⇓
X .244 (6.20)
⇔
) which is 3TA (.260 (6.60)
⇓
X .245 (6.20)
⇔
) or 3TB
(.250 (6.35)
⇓
X .235 (6.00)
⇔
).
The recommended change would be to a Style “A”, if available. This pawl change should
decrease the wrench reading to within approximately 1% of nominal.
4. Check the pawl and pawl slot for worn or damaged edges. Choose the appropriate
pawl to increase
⇒
or decrease
⇐
the reading.
5. Go to page 15 and follow instructions 4 through 9 to calibrate.
OR
6. To disassemble, clean, inspect and re-lubricate go to page 14 and follow instructions
1 though 9.
PAWL SELECTION CHART
STYLE SIZE & ORIENTATION
Metric sizes (mm) are in parentheses ().
♦ ♦ ♦ ♦
5T 4T 3T 2T 1T 0 1S 2S 3S 4S 5S
A
.260
(6.60)
or
A
⇓⇓⇓⇓
.235
(6.00)
⇔ ⇔ ⇔ ⇔
A
⇓⇓⇓⇓
.240
(6.10)
⇔ ⇔ ⇔ ⇔
A
⇓⇓⇓⇓
✷ ✷ ✷ ✷
✷
✷ ✷ ✷
.245
(6.20)
⇔ ⇔ ⇔ ⇔
A
⇓⇓⇓⇓
.250
(6.35)
⇔ ⇔ ⇔ ⇔
B
.250
(6.35)
B
⇓⇓⇓⇓
.230
(5.85)
⇔ ⇔ ⇔ ⇔
B
⇓⇓⇓⇓
.235
(6.00)
⇔ ⇔ ⇔ ⇔
B
⇓⇓⇓⇓
.240
(6.10)
⇔ ⇔ ⇔ ⇔
B
⇓⇓⇓⇓
.244
(6.20)
⇔ ⇔ ⇔ ⇔
B
⇓⇓⇓⇓
B
⇔ ⇔ ⇔ ⇔
.244
⇓⇓⇓⇓
(6.20)
B
⇔ ⇔ ⇔ ⇔
.240
⇓⇓⇓⇓
(6.10)
B
⇔ ⇔ ⇔ ⇔
.235
⇓⇓⇓⇓
(6.00)
B
⇔ ⇔ ⇔ ⇔
.230
⇓⇓⇓⇓
(5.85)
B
⇔ ⇔ ⇔ ⇔