Cleaning, Lubrication, Repair tools required – CDI Torque TORQUE WRENCHES Micro-Adjustable Click Type User Manual
Page 7: Micrometer adjustable torque wrenches
Page 3
INTRODUCTION
This manual covers the calibration, repair, maintenance and a troubleshooting guide to
identify and remedy problems that could occur with the CDI Torque Wrenches. Each
wrench model has an Exploded Illustration that lists the component parts and shows
assembly particulars. The exploded illustration must be used as a guide for assembling
CDI Torque Wrenches. CDI has a Service Center that performs repairs and calibration on
all of our products at the factory, plus a list of factory authorized repair/calibration
centers throughout the world. Contact CDI Service Center at (626) 965-0668 or
for technical assistance on the repair or calibration of CDI Torque
Products.
CLEANING
Wipe all exterior parts with a dry, clean and lint free cloth. DO NOT USE any abrasive
or corrosive materials to clean any components of the CDI Torque Wrenches. After
assembly, a non-abrasive polishing agent applied with a dry, clean and lint free cloth may
be used to polish the chrome exterior parts.
LUBRICATION
Super Lube MULTI-Purpose Synthetic Lubrication with Teflon, CDI Part #10-
1000. NO SUBSTITUTES ALLOWED.
REPAIR TOOLS REQUIRED
Micrometer Adjustable Torque Wrenches
*
Torque Tester (range determined by the torque wrench to be tested)
1
Flat blade mini screwdriver (max. blade size .063 or 1.6mm)
1
End Cutter (modified jaws ground flat on top to allow rivet removal)
2
CDI Calibration Crank Handle (Pt. # 600-8-1 & 600-8-2) 7/16” & 3/8” hex
1
0 to 1” micrometer with tenth (.0000) increments
1
16 oz. hammer
1
40 to 200 In. Lb. CDI Torque Wrench
1
3/8” 6 Point Deep Socket
1
7/16” 6 Point Deep Socket
*We recommend that CDI torque testers are used to test the calibration accuracy of
CDI manufactured torque products.
CDI manufactures a complete line of torque testing equipment from moderately
priced testers to complete state of the art test systems used in metrology calibration
laboratories all over the world. Contact CDI Sales Department at (626) 965-0668 or
for the nearest distributor of CDI Torque Products.