Detex 14DV Trim - Manual (Page 3)

ASSEMBLING THE OUTSIDE TRIM AND BACKPLATE
12. Align the hex stand-offs and trim assembly through the drilled holes (Fig. T10).
13. Align the tail piece extension into the backplate’s trim cam on the inside face of the door.
14. Fasten the backplate to the inside face of the door with lockwashers and 1/4-20 machine
screws provided with Exit Device Hardware Kit. Caution: The lever should easily operate the
inside trim cam.
15. Resume the panic hardware instruction #15.
Fig. T9
DETEX INS-101295 Page 3
11. Drill holes “a” according to the chart (Fig. T9).
Fig. T10