Dynojet 250iP: Air Brake and EEC Kit - Manual (Page 15)

I N S T A L L A T I O N G U I D E
Air Brake
Version 1 Air Brake and EEC Kit Installation Guide for 200i/250i and 200iP/250iP Motorcycle Dynamometers
11
6 Secure the brake bracket to the drum module frame using two 5/8-11 x 1.25-inch
12-point bolts torquing to 112 foot-pounds.
Note: For clarity, the side drum module hood is not shown.
Figure 9: Securing the Brake Bracket
7 Place the brake assembly on the brake bracket.
Figure 10: Securing the Air Brake Assembly
brake bracket
bolt
air brake assembly