Dynojet 250iP: Air Brake and EEC Kit User Manual
Page 17

I N S T A L L A T I O N G U I D E
Air Brake
Version 1
Air Brake and EEC Kit Installation Guide for 200i/250i and 200iP/250iP Motorcycle Dynamometers
13
8d
Secure the bottom clevis pin with a hairpin cotter.
Figure 13: Securing the Bottom Clevis Pin with a Hairpin Cotter
9
Loosely secure the brake caliper stop to the brake bracket using two
3/8-16 x 3/4-inch bolts with lock washers and two 5/16-inch flat washers.
Note: For clarity, the drum, parts of the dyno frame, and the air brake assembly
spring are not shown.
Figure 14: Securing the Brake Caliper Stop
Note: Before proceeding with the rest of the air brake installation it is necessary
to connect the shop air and check the brake pad clearance.
bottom clevis pin
hairpin cotter
brake caliper stop
brake bracket