Dynojet 250iP: Air Brake and EEC Kit - Manual (Page 9)

I N S T A L L A T I O N G U I D E
Air Brake
Version 1 Air Brake and EEC Kit Installation Guide for 200i/250i and 200iP/250iP Motorcycle Dynamometers
5
7 Remove the four 1/4-20 x 5/8-inch pan head screws securing the bearing bracket
to the tire carriage and set aside.
8 Using the hand crank, unscrew the bearing bracket and the carriage screw and set
aside.
9 Remove the tire carriage by sliding the carriage under the carriage clamps toward
the back of the dyno and set aside.
Figure 3: Removing the Tire Carriage
hand crank
carriage screw
bolt
carriage clamp
tire carriage
bearing bracket