Environmental Water Systems RU Series - Manual (Page 2)

EWS, Inc. / Environmental Water Systems 4.2-2
www.EWSWATER.com office: 702-256-8182 (m-f; 8:30-4:30, pst) fax: 702-256-3744 [email protected]
A Special Message to Our Customers,
EWS, Inc. and Environmental Water Systems would like to thank you for your consideration in selecting from our
comprehensive list of residential filtration and conditioning product.
We recommend that you take the time to read the information that pertains to your product as you begin to use it.
The information in this manual is designed to assist your installer to set-up, install and start-up your system properly.
In addition, the information contained in this manual is designed to provide the consumer, the most comprehensive
information on this series of product.
Please contact us if you have any questions, comments or additions to the information provided.
Sincerely,
Customer Service at EWS, Inc.
EWS, Inc. and Environmental Water Systems
9101 W. Sahara Ave., Suite 105-J8
Las Vegas, NV. 89117
Office: 702-256-8182 Available Monday through Friday, 8:30 - 4:30 Pacific Standard Time
Fax: 702-256-3744 Dedicated and Available 24/7
E-Mail: [email protected]
Web Site: www.ewswater.com
Installation of the Filtration System - Please Read the Enclosed Information
Please take the time to familiarize yourself with the unit you are about to install. The Table of Contents will point to
specific instructions for the simple step-by-step instructions for;
Installation of a Dispenser/Faucet
Placement or Locating the Water System
Inlet Supply Water Connection
Connection of Tubing from Supply and to Dispenser/Faucet
System Start-Up and Operation Procedures
You may need the following for proper installation:
• Teflon tape • Work Gloves • Safely Glasses • Knife or scissors
• Adjustable Wrench • Pliers • Screwdriver; straight & phillips • Drill & drill bits
WARNING: Verify that all components are included with the unit and were not lost, misplaced, or damaged in shipping
or handling. Any damage in shipping needs to be reported to the shipping company.
WARNING: Do not attempt to install this system using defective or damaged components. Check and inspect, inlet and
outlet fittings and any other connections on this system that might have been damaged during shipping and handling. Check
all these components again upon installation and start-up for any hidden issues. All plumbing should be done in accordance
with all local plumbing codes. Water Pressure: minimum 40psi, maximum 65psi. Water Temperature Range (cold supply
only): not to exceed 95°F or below 40°F. Electrical (if applicable): an uninterrupted a/c supply, (if applicable): make sure
voltage supply is compatible with your unit prior to install
WARRANTY: Warranty Registration of this product is required to have a warranty. A proper installation and start-up will
save you time, money and hassles, and is also required for warranty purposes. Any issue as a result of improper application,
set-up, installation and/or start-up will void any warranty.