9 network (dhcp pool config), 10 bootfile, 11 domain-name – Kontron AT8901M CLI User Manual
Page 235: Network (dhcp pool config) - 35, 10 bootfile - 35 5.8.11 domain-name - 35, At8901m utility commands

AT8901M
Utility Commands
Page 5 - 35
AT8901M CLI Reference Manual
Mode
DHCP Pool Config
5.8.9
network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool
on the server. Network-number is a valid IP address, made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the
specified address pool. The prefix-length is an integer from 0 to 32.
Default
none
Format
network <networknumber> [{<mask> | <prefixlength>}]
Mode
DHCP Pool Config
5.8.9.1
no network
This command removes the subnet number and mask.
Format
no network
Mode
DHCP Pool Config
5.8.10
bootfile
The command specifies the name of the default boot image for a DHCP client. The
<filename>
specifies the boot image file.
Format
bootfile <filename>
Mode
DHCP Pool Config
5.8.10.1
no bootfile
This command deletes the boot image name.
Format
no bootfile
Mode
DHCP Pool Config
5.8.11
domain-name
This command specifies the domain name for a DHCP client. The
<domain>
specifies
the domain name string of the client.
Default
none
Format
domain-name <domain>
Mode
DHCP Pool Config
5.8.11.1
no domain-name
This command removes the domain name.
Format
no domain-name
Mode
DHCP Pool Config