5 session-limit, 6 session-timeout, 7 telnetcon maxsessions – Kontron AT8901M CLI User Manual
Page 260: Session-limit - 8, Session-timeout - 8, Telnetcon maxsessions - 8, Management commands at8901m
Management Commands
AT8901M
AT8901M CLI Reference Manual
Page 6 - 8
Mode
Line Config
6.3.4.1
no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
Format
no transport output telnet
Mode
Line Config
6.3.5
session-limit
This command specifies the maximum number of simultaneous outbound Telnet
sessions. A value of 0 indicates that no outbound Telnet session can be established.
Default
5
Format
session-limit
<0-5>
Mode
Line Config
6.3.5.1
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to
the default value.
Format
no session-limit
Mode
Line Config
6.3.6
session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is
minutes. A value of 0 indicates that a session remains active indefinitely.
Default
0
Format
session-timeout
<0-160>
Mode
Line Config
6.3.6.1
no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value
unit of time is minutes.
Format
no session-timeout
Mode
Line Config
6.3.7
telnetcon maxsessions
This command specifies the maximum number of Telnet connection sessions that can
be established. A value of 0 indicates that no Telnet connection can be established. The
range is 0-5.
Default
5
Format
telnetcon maxsessions
<0-5>
Mode
Privileged EXEC