Kontron AT8901M CLI - Manual (Page 273)

AT8901M Management Commands
Page 6 - 21 AT8901M CLI Reference Manual
NOTE: This command is valid only when the Link Up/Down Flag is enabled.
“snmp-server enable traps linkmode” on page 6 - 18.
Format
snmp trap link-status
Mode Interface Config
6.6.18.1 no snmp trap link-status
This command disables link status traps by interface.
NOTE: This command is valid only when the Link Up/Down Flag is enabled.
See 6.6.11 “snmp-server enable traps linkmode” on page 6 - 18).
Format
no snmp trap link-status
Mode Interface Config
6.6.19 snmp trap link-status all
This command enables link status traps for all interfaces.
NOTE: This command is valid only when the Link Up/Down Flag is enabled.
See 6.6.11 “snmp-server enable traps linkmode” on page 6 - 18
Format
snmp trap link-status all
Mode Global Config
6.6.19.1 no snmp trap link-status all
This command disables link status traps for all interfaces.
NOTE: This command is valid only when the Link Up/Down Flag is enabled.
See 6.6.11 “snmp-server enable traps linkmode” on page 6 - 18
Format
no snmp trap link-status all
Mode Global Config
6.6.20 show snmpcommunity
This command displays SNMP community information. Six communities are
supported. You can add, change, or delete communities. The switch does not have to be
reset for changes to take effect.
The SNMP agent of the switch complies with SNMP Versions 1, 2 or 3. For more
information about the SNMP specification, see the SNMP RFCs. The SNMP agent
sends traps through TCP/IP to an external SNMP manager based on the SNMP
configuration (the trap receiver and other SNMP community parameters).
Format
show snmpcommunity
Mode Privileged EXEC
SNMP Community Name The community string to which this entry grants access. A
valid entry is a case-sensitive alphanumeric string of up to 16 charac-
ters. Each row of this table must contain a unique community name.
Client IP Address An IP address (or portion thereof) from which this device will
accept SNMP packets with the associated community. The requesting
entity's IP address is ANDed with the Subnet Mask before being com-