Kontron AT8901M CLI - Manual (Page 278)

Management Commands AT8901M
AT8901M CLI Reference Manual Page 6 - 26
6.8.7.1 no radius server timeout
This command sets the timeout value to the default value.
Format
no radius server timeout
Mode Global Config
6.8.8 show radius
This command is used to display the various RADIUS configuration items for the
switch as well as the configured RADIUS servers. If the optional token 'servers' is not
included, the following RADIUS configuration items are displayed.
Format
show radius
[servers]
Mode Privileged EXEC
Primary Server IP Address The configured server currently in use for authentication.
Number of configured servers The configured IP address of the authentication
server.
Max number of retransmits The configured value of the maximum number of times
a request packet is retransmitted.
Timeout Duration The configured timeout value, in seconds, for request re-transmis-
sions.
Accounting Mode Yes or No.
If you use the [servers] keyword, the following information displays:
IP Address IP address of the configured RADIUS server.
Port The port in use by this server.
Type Primary or secondary.
Secret Configured Yes / No.
Message Authenticator The message authenticator attribute for the selected server,
which can be enables or disables.
6.8.9 show radius accounting
This command is used to display the configured RADIUS accounting mode,
accounting server and the statistics for the configured accounting server.
Format
show radius accounting
[statistics <ipaddr>]
Mode Privileged EXEC
If you do not specify any parameters, then only the accounting mode and the RADIUS
accounting server details are displayed.
Mode Enabled or disabled
IP Address The configured IP address of the RADIUS accounting server.
Port The port in use by the RADIUS accounting server.
Secret Configured Yes or No.
If you use the optional statistics <ipaddr> parameter, the statistics for the configured
RADIUS accounting server are displayed. The IP address parameter must match that of