Kontron TIGH2U Carrier Grade Server - Manual (Page 131)

Kontron Carrier Grade Server TIGH2U
December 2009 Product Guide, rev.1.2
131

Regulatory and Certification Information—TIGH2U Server
The CE marking on this product indicates that it is in compliance with the European Union’s EMC
Directive 89/336/EEC, and Low Voltage Directive 73/23/EEC.The TIGH2U Server is not suitable for
use with a visual display workplace device according to the German Ordinance for Work with Visual
Display Units because it has a glossy front.
B.3.4 VCCI (Japan)
English translation of the notice above:
This is a Class A product based on the standard of the Voluntary Control Council for Interference
(VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use the equipment according to
the instruction manual.
B.3.5 BSMI (Taiwan)
The BSMI Certification Marking and EMC warning is located on the outside rear area of the product.
B.3.6 Regulated Specified Components
To maintain the UL listing and compliance to other regulatory certifications and/or declarations, the
following conditions must be adhered to and the following regulated components must be used.
Interchanging or using other components will void the UL listing and other product certifications and
approvals.
1. Add-in boards must have a printed wiring board flammability rating of minimum UL94V-1. Add-in
boards containing external power connectors and/or lithium batteries must be UL recognized or
UL listed. Any add-in board containing modem telecommunication circuitry must be UL listed. In
addition, the modem must have the appropriate telecommunications, safety, and EMC approvals
for the region in which it is sold.
2. Peripheral Storage Devices must be a UL recognized or UL listed accessory and TUV or VDE
licensed. Maximum power rating of any one device is 19 watts. Total server configuration is not to
exceed the maximum loading conditions of the power supply.