Kontron TIGH2U Carrier Grade Server - Manual (Page 87)

Kontron Carrier Grade Server TIGH2U
December 2009 Product Guide, rev.1.2
87

Server Component Replacements—TIGH2U Server
5.3.2 Removing the LED Light Pipe Assembly
1. Note the position of the light pipe assembly so that you will be able to correctly position it (or a
replacement) on the new TAM board. 
The light pipes extend outward from the TAM board to the front control panel.
2. Remove the light pipe assembly by gently pressing the four plastic clips from the under-side of
the TAM board until the bottom of the clips are flush with the bottom of the TAM board. (“A”)
3. Gently ease the light pipe assembly from the TAM board. (“B”)
Figure 68. Removing LED Light Pipe Assembly
TS000460
A
A
B