Losi XXX-S Sport - Manual (Page 27)

92
110 122
121
114
123
66
63
110
122
121
157
120
66
BAG F (Continued)
24
Step F-6
Figure 55
Step F-7
Figure 56
q 1. Position the bottom of an assembled "Long" Rear Shock in
front of the Shock mounting area on the Left Rear Suspension Arm
(92) as shown in Figure 55. Align the hole in the Shock Mount Ball
(110) with the Outside Hole in the Arm.
q 2. Attach the Shock to the Rear Arm by threading a 4-40 x 1/2"
Cap Head Screw (122) through the Shock Mount Ball into the outside
Shock mounting hole in the Suspension Arm.
q 3. Slide a "Long" Shock Mount Bushing (123), large side first,
over the Screw (66) on the left side of the Tower.
Before attaching the top of the shock, make sure that the
dogbone is in place in the outdrive.
q 4. Place the top of the Shock Body (114) over the Shock Mount
Bushing. Secure the Shock to the Tower by threading a 4-40 Nylon
Locknut onto the Shock Mount Screw.
q 5. Repeat Steps 1-4 for the Right Rear Shock assembly.
122 123
q 1. Position the bottom of an assembled "Short" Front Shock in
front of the Shock mounting area on the Left Front Suspension Arm
(63) as shown in Figure 56. Align the hole in the Shock Mount Ball
(110) with the Middle hole in the Arm.
q 2. Secure the Shock to the Arm by threading a 4-40 x 1/2" Cap
Head Screw (122) all the way into the Arm from the front.
q 3. Slide a "Short" Shock Bushing (120), large side first, over the
Screw (66) on the Left side of the Front Shock Tower.
Once again, before attaching the top of the shock, make sure
that the dogbone is in place in the outdrive.
q 4. Place the top of the Front Shock Body (157) over the Shock
Mount Bushing on the Tower. Secure the Shock assembly to the
Tower by threading a 4-40 Nylon Locknut (121) onto the Shock Mount
Screw.
q 5. Repeat Steps 1-4 for the right shock assembly.
120 122
Rear Shock Install
Front Shock Install
121
121