Mercedes-Benz S-Sedan 2015 Owners Manual - Manual (Page 130)

The supplementary cushion is located in the
vehicle.
The supplementary cushion is attached to the
head restraint by three press studs.
To install the supplementary cushion:
X Position the head restraint as far forwards
as possible (
Y
page 117).
X
Hold supplementary cushion ; against
the head restraint and push press studs :
into the counterpieces.
To remove the supplementary cushion:
X Position the head restraint as far forwards
as possible (
Y
page 117).
X
Release press studs : and remove sup-
plementary cushion ;.
Adjusting the rear center head
restraints
Retracting and extending electrically
This function is available on vehicles with
electrically adjustable rear seats.
X Press and hold button : until the head
restraint has fully extended or retracted.
Folding into position mechanically
This function is available on vehicles with a
rear bench seat.
X
Pull the head restraint up until it engages.
Adjusting the multicontour seat
The multicontour seat can be adjusted using
COMAND (see the separate operating
instructions).
Adjusting the active multicontour
seat
Vehicles fitted with the seating comfort
package: you can adjust the active multicon-
tour driver and passenger seats with
COMAND (see the separate operating
instructions).
Multicontour seat in the rear
You can adjust the multicontour seats for the
outer seats using the remote control (see the
separate operating instructions).
Adjusting the 4-way lumbar support
The 4-way lumbar support can be adjusted
with COMAND (see the separate operating
instructions).
128
Seats
Seats,
steering
wheel
and
mirrors