Safe ty, Occupant safety – Mercedes-Benz S-Sedan 2015 Owners Manual User Manual

Page 52

Advertising
background image

Rear seat belt buckle extenders

The seat belt extender is an integral part of

the PRE-SAFE

®

convenience function. It is

used on the outer rear seats.
Always ensure that it is possible to move the

belt buckle freely. Always stow objects in the

vehicle correctly.
To assist you in finding the seat belt buckle

and fastening the seat belt:

R

the belt buckle moves forwards to a con-

venient position

R

the belt buckle is illuminated

After the seat belt is fastened, the belt buckle

returns to its normal position. The seat belt

then lies tight across the lap and thorax areas.
Incorporation into the PRE-SAFE

®

system:

the belt buckle is lowered quickly in certain

hazardous situations. This pre-tensions the

seat belt.
Incorporation into the automatic meas-

ures after the accident: in this situation, the

belt buckle is illuminated and extended after

a rear door is opened.

Releasing seat belts
!

Make sure that the seat belt is fully rolled

up. Otherwise, the seat belt or belt tongue

will be trapped in the door or in the seat

mechanism. This could damage the door,

the door trim panel and the seat belt. Dam-

aged seat belts can no longer fulfill their

protective function and must be replaced.

Visit a qualified specialist workshop.

X

Press release button : and guide belt

tongue ; back towards belt outlet =.

Seat belt adjustment

The seat-belt adjustment is an integral part of

the PRE-SAFE

®

convenience function. This

function adjusts the driver's and front-

passenger seat belt to the upper body of the

occupants.
The belt strap is tightened slightly when:

R

the belt tongue is engaged in the buckle

and

R

the ignition is switched on

The seat-belt adjustment will apply a certain

retraction force if any slack is detected

between the vehicle occupant and the seat

belt. Do not hold on to the seat belt tightly

while it is adjusting.
You can switch the seat-belt adjustment on

and off using COMAND. Information on

switching the belt adjustment function on and

off can be found in the digital operating

instructions or in the separate COMAND

operating instructions.

Belt warning for the driver and front

passenger

The 7 seat belt warning lamp in the instru-

ment cluster is a reminder that all occupants

50

Occupant safety

Safe

ty

Advertising