Li ghts and wi ndsh ie ld wi pers, Windshield wipers – Mercedes-Benz S-Sedan 2015 Owners Manual User Manual

Page 151

Advertising
background image

Replacing bulbs

The front and rear light clusters of your vehi-

cle are equipped with LED light bulbs. Do not

replace the bulbs yourself. Contact a qualified

specialist workshop which has the necessary

specialist knowledge and tools to carry out

the work required.
Lamps are an important aspect of vehicle

safety. You must therefore make sure that

these function correctly at all times. Have the

headlamp setting checked regularly.

Windshield wipers

Switching the windshield wipers

on/off

!

Do not operate the windshield wipers

when the windshield is dry, as this could

damage the wiper blades. Moreover, dust

that has collected on the windshield can

scratch the glass if wiping takes place when

the windshield is dry.
If it is necessary to switch on the windshield

wipers in dry weather conditions, always

use washer fluid when operating the wind-

shield wipers.

!

If the windshield wipers leave smears on

the windshield after the vehicle has been

washed in an automatic car wash, wax or

other residues may be the reason for this.

Clean the windshield using washer fluid

after washing the vehicle in an automatic

car wash.

!

Vehicles with a rain sensor: if the wind-

shield becomes dirty in dry weather condi-

tions, the windshield wipers may be acti-

vated inadvertently. This could then dam-

age the windshield wiper blades or scratch

the windshield.
For this reason, you should always switch

off the windshield wipers in dry weather.

1

$ Windshield wiper off

2

Ä Intermittent wipe, low (rain sensor

set to low sensitivity)

3

Å Intermittent wipe, high (rain sensor

set to high sensitivity)

4

° Continuous wipe, slow

5

¯ Continuous wipe, fast

B

í Single wipe/î to wipe the wind-

shield using washer fluid

X

Switch on the power supply with the Start/

Stop button or the SmartKey (

Y

page 173).

X

Turn the combination switch to the corre-

sponding position.

In the Ä or Å position, the appropriate

wiping frequency is set automatically accord-

ing to the intensity of the rain. In the Å

position, the rain sensor is more sensitive

than in the Ä position, causing the wind-

shield wipers to wipe more frequently.
Vehicles with MAGIC VISION CONTROL: the

washer fluid is fed through the wiper blades

and when wiping with washer fluid î the

washer fluid is emitted directly from the

blades.
Vehicles with MAGIC VISION CONTROL: if

you push and hold the combination switch

beyond the point of resistance in the direction

of arrow B, the manual wash program is

activated. If you briefly push and hold the

combination switch beyond the point of

resistance in the direction of arrow B, the

automatic wash program is activated.
If the wiper blades are worn, the windshield

will no longer be wiped properly. This could

Windshield wipers

149

Li

ghts

and

wi

ndsh

ie

ld

wi

pers

Z

Advertising