Breakdown assistance, Towing and tow-starting – Mercedes-Benz S-Sedan 2015 Owners Manual User Manual

Page 385

Advertising
background image

It is better to have the vehicle transported

than to have it towed.
If the vehicle has suffered transmission dam-

age, have it transported on a transporter or

trailer.
The automatic transmission must be in posi-

tion N when the vehicle is being towed.
If the automatic transmission cannot be

shifted to position N, have the vehicle trans-

ported on a transporter or trailer.
The battery must be connected and charged.

Otherwise, you:

R

cannot turn the SmartKey to position 2 in

the ignition lock

R

cannot release the electric parking brake

R

cannot shift the automatic transmission to

position N

i

Disarm the automatic locking feature

before the vehicle is towed (

Y

page 92). You

could otherwise be locked out when push-

ing or towing the vehicle.

Installing/removing the towing eye

Installing the towing eye

The brackets for the screw-in towing eyes are

located in the bumpers. They are at the rear

and at the front, under covers :.

X

Remove the towing eye from the vehicle

tool kit/stowage tray (

Y

page 370).

X

Press the mark on cover : inwards in the

direction of the arrow.

X

Remove cover : from the opening.

X

Screw in and tighten the towing eye clock-

wise to the stop.

Removing the towing eye

X

Unscrew and remove the towing eye.

X

Attach cover : to the bumper and press

until it engages.

X

Place the towing eye in the vehicle tool kit/

stowage tray.

Towing the vehicle with the rear axle

raised

Only vehicles without 4MATIC can be

towed with the rear axle raised.

!

The ignition must be switched off if you

are towing the vehicle with the rear axle

raised. Intervention by ESP

®

could other-

wise damage the brake system.

!

Vehicles with 4MATIC must not be towed

with either the front or the rear axle raised,

as doing so will damage the transmission.

Vehicles with 4MATIC may either be towed

away with both axles on the ground or be

loaded up and transported.

X

Switch on the hazard warning lamps

(

Y

page 144).

X

Bring the front wheels into the straight-

ahead position.

X

If necessary, turn the SmartKey in the igni-

tion lock to position 0 and remove the

SmartKey from the ignition lock.

X

Take the SmartKey with you when you leave

the vehicle.

When towing your vehicle with the rear axle

raised, it is important that you observe the

safety instructions (

Y

page 382).

Towing and tow-starting

383

Breakdown

assistance

Z

Advertising