Mercedes-Benz S-Sedan 2015 Owners Manual - Manual (Page 403)

set, these incorrect values will be moni-
tored.
X
Also observe the notes in the section on tire
pressures (
Y
page 393).
X Make sure that the SmartKey is in position
2 in the ignition lock (
Y
page 173).
X
Use ò on the steering wheel to call up
the list of menus.
X Press the 9 or : button on the steer-
ing wheel to select the Service Service menu.
X
Press the a button.
X
Press the 9 or : button to select
Tire Pressure Tire Pressure .
X
Press the a button.
The Run Flat Indicator Active Run Flat Indicator Active
Press 'OK' to Restart Press 'OK' to Restart message
appears in the multifunction display.
If you wish to confirm the restart:
X
Press the a button.
The Tire Pressure Now OK? Tire Pressure Now OK? message
appears in the multifunction display.
X
Press the 9 or : button to select
Yes Yes .
X Press the a button.
The Run Flat Indicator Restarted Run Flat Indicator Restarted
message appears in the multifunction dis-
play.
After a teach-in period, the tire pressure
loss warning system will monitor the set
tire pressures of all four tires.
If you wish to cancel the restart:
X
Press the % button.
or
X If the Tire Pressure Now OK? Tire Pressure Now OK? message
appears, use the 9 or : button to
select Cancel Cancel .
X Press the a button.
The tire pressure values stored at the last
restart will continue to be monitored.
Loading the vehicle
Instruction labels for tires and loads
G WARNING
Overloaded tires can overheat, causing a
blowout. Overloaded tires can also impair the
steering and driving characteristics and lead
to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load
rating must be at least half of the GAWR of
your vehicle. Never overload the tires by
exceeding the maximum load.
Two instruction labels on your vehicle show
the maximum possible load.
(1) The Tire and Loading Information placard
is on the B-pillar on the driver's side. The
Tire and Loading Information placard
shows the maximum permissible number
of occupants and the maximum permis-
sible vehicle load. It also contains details
of the tire sizes and corresponding pres-
sures for tires mounted at the factory.
(2) The vehicle identification plate is on the
B-pillar on the driver's side. The vehicle
identification plate informs you of the
gross vehicle weight rating. It is made up
of the vehicle weight, all vehicle occu-
pants, the fuel and the cargo. You can
also find information about the maximum
gross axle weight rating on the front and
rear axle.
The maximum gross axle weight rating is
the maximum weight that can be carried
by one axle (front or rear axle). Never
exceed the maximum load or the maxi-
mum gross axle weight rating for the
front or rear axle.
Loading the vehicle
401
Wheels
and
tires
Z