Driving and parking, Driving systems – Mercedes-Benz S-Sedan 2015 Owners Manual User Manual

Page 210

Advertising
background image

If you wish to exit the vehicle, always turn off

DISTRONIC PLUS and secure the vehicle

against rolling away.

For further information on deactivating

DISTRONIC PLUS (

Y

page 210).

If DISTRONIC PLUS detects that the vehicle in

front is stopping, it brakes your vehicle until it

is stationary.
Once your vehicle is stationary, it remains

stationary and you do not need to depress the

brake.
After a time, the electric parking brake

secures the vehicle and relieves the service

brake.
Depending on the specified minimum dis-

tance, your vehicle will come to a standstill at

a sufficient distance behind the vehicle in

front. The specified minimum distance is set

using the control on the cruise control lever.
The electric parking brake automatically

secures the vehicle if DISTRONIC PLUS is

activated and:

R

the seat belt is unfastened and the driver's

door is open.

R

the engine is switched off, unless it is auto-

matically switched off by the ECO start/

stop function.

R

a system malfunction occurs.

R

the power supply is not sufficient.

If a malfunction occurs, then the transmission

may be shifted into position P automatically.

Setting a speed

X

Press the cruise control lever up : for a

higher speed or down ; for a lower speed.

X

To adjust the set speed in 1 mph incre-

ments (1 km/h increments): briefly

press the cruise control lever up : or

down ; to the pressure point.

Every time the cruise control lever is

pressed up : or down ; the last speed

stored is increased or reduced.

X

To adjust the set speed in 5 mph incre-

ments (10 km/h increments): briefly

press the cruise control lever up : or

down ; to the pressure point.

Every time the cruise control lever is

pressed up : or down ;, the last speed

stored is increased or reduced.

i

If you accelerate to overtake, DISTRONIC

PLUS adjusts the vehicle's speed to the last

speed stored after you have finished over-

taking.

Setting the specified minimum distance

You can set the specified minimum distance

for DISTRONIC PLUS by varying the time span

between one and two seconds. With this func-

tion, you can set the minimum distance that

DISTRONIC PLUS keeps to the vehicle in

front, dependent on vehicle speed. You can

see this distance in the multifunction display

(

Y

page 209).

i

Make sure that you maintain the mini-

mum distance to the vehicle in front as

required by law. Adjust the distance to the

vehicle in front if necessary.

208

Driving systems

Driving

and

parking

Advertising