Coman d, System settings – Mercedes-Benz S-Class 2013 Owners Manual User Manual

Page 149

Advertising
background image

Indicator lamp displays
The indicator lamp displays the following

possible stati for the batteries and

headphones:

Display

Status

Green

The batteries are fine.

Red

The batteries are almost

discharged.

Continuou

sly lit

either

green or

red

The headphones are switched

on and connected to a screen.

Flashes

either

green or

red

The headphones are

searching for the connection

to a screen.

No display

(dark)

The headphones are switched

off or the batteries are

discharged.

Connecting additional headphones
You can connect an additional set of corded

headphones to each rear-compartment

screen (

Y

page 144).

Changing batteries

Batteries are required for the remote control

and for the two sets of cordless headphones.

Changing batteries (

Y

page 251)

System settings

Display settings

Switching the display on/off

X

Select

Vehicle

by turning cVd the

COMAND controller and press W to

confirm.

X

Select

Display OFF

by turning cVd the

COMAND controller and press W to

confirm.

X

To switch on the display: press W or

cVd turn the COMAND controller.

Display design

Your COMAND display features optimized

designs for operation during daytime and

night-time hours. You can customize the

design to suit your personal preferences by

manually selecting day or night design or opt

for an automatic setting.

X

Select

Vehicle

by turning cVd the

COMAND controller and press W to

confirm.

X

Select

System

by turning cVd the

COMAND controller and press W to

confirm.

X

Select

Display

and press W to confirm.

X

Select

Day Mode

,

Night Mode

or

Automatic

by turning cVd the COMAND

controller and press W to confirm.

The # icon indicates the current setting.

Design

Explanation

Day Mode

The display is set

permanently to day

design.

Night Mode

The display is set

permanently to night

design.

Automatic

The display design

changes depending on

the brightness around

the vehicle.

i

In the

Automatic

setting, COMAND

evaluates the readings from the automatic

vehicle light sensor and switches between

the display designs automatically.

System settings

147

COMAN

D

Z

Advertising