Driving and parking, Driving – Mercedes-Benz S-Class 2013 Owners Manual User Manual

Page 309

Advertising
background image

could lose control of the vehicle and hit

someone or something. Only shift into gear

when the engine is idling normally and when

your right foot is firmly on the brake pedal.

G

WARNING

HYBRID vehicles: It is imperative that you read

the HYBRID Supplemental Operating

Instructions included in your vehicle literature

portfolio. You may otherwise not receive all

necessary safety information and warning for

the operation of your vehicle.

!

Warm up the engine quickly. Do not use

the engine's full performance until it has

reached operating temperature.
Only shift the automatic transmission to

the desired drive position when the vehicle

is stationary.
Where possible, avoid spinning the drive

wheels when pulling away on slippery

roads. You could otherwise damage the

drive train.

!

S 63 AMG: at low engine oil temperatures

below 68 ‡ (+20 †), the maximum engine

speed is restricted in order to protect the

engine. To protect the engine and maintain

smooth engine operation, avoid driving at

full throttle when the engine is cold.

SmartKey positions

SmartKey

g

To remove the SmartKey

1

Power supply for some consumers, such

as the windshield wipers

2

Ignition (power supply for all consumers)

and drive position

3

To start the engine

i

The SmartKey can be turned in the

ignition lock even if it is not the correct

SmartKey for the vehicle. The ignition is not

switched on. The engine cannot be started.

KEYLESS-GO

General information
Vehicles with KEYLESS-GO are equipped with

a SmartKey featuring an integrated KEYLESS-

GO function and a detachable Start/Stop

button.
The Start/Stop button must be inserted into

the ignition lock and the SmartKey must be in

the vehicle.
Pressing the Start/Stop button several times

in succession corresponds to the different

SmartKey positions in the ignition lock. This

is only the case if you are not depressing the

brake pedal.
If you depress the brake pedal and press the

Start/Stop button, the engine starts

immediately.
The Start/Stop button can be removed from

the ignition lock. Then, you can insert the

SmartKey into the ignition lock.

Driving

307

Driving

and

parking

Z

Advertising